Automatic Tail Cutter and Gluer
A hydraulic shaftless unwinder is a type of unwinding system used in slitter rewinder machines to support and unwind heavy jumbo rolls of materials, such as paper, film, foil, and textile.
The system consists of a hydraulic power unit, a support structure, and a set of rollers to hold and guide the jumbo roll.
- Water Based Gluer For Sealing The ATM POS Roll
- Working Stroke is 900-1400mm
- Must Clean Whole System Daily

Leading China Paper Converter Equipment
Paper converter equipment, also known as a slitter rewinder, is a machine that is designed to convert large rolls of paper or other materials into smaller rolls. The process involves cutting the material into the desired size and then rewinding it onto a new core.
Slitter rewinders are commonly used in industries such as packaging, printing, and converting. They can handle a wide range of materials, including thermal paper, kraft paper,plastic films, and metal foils. The machine can be configured to cut the material to a specific width, length, or shape, depending on the application.
Jota Machinery is a company with over 10 years of experience in the paper converter equipment industry. Our slitting machines are known for the high quality and reliability.
If you are interested in learning more about their equipment, you can contact us for more information.
Fiberglass reinforced thermoplastic composite uni-directional tape is a high-performance material made by combining thermoplastic resins with fiberglass reinforcement in a unidirectional pattern.
Uni-directional prepreg tape is known for its exceptional strength, stiffness, and durability, making it ideal for use in a wide range of applications, including aerospace, automotive, and sporting goods.
- Works for CFRT Thermoplastic Uni-directional Prepreg Tape and Other Material
- Unique Shaftless Design
- Max Unwinding Diameter is 1200mm
- Equiped Automatic Unloading Device
Special Design (4)
Rewinding Effect (4)
Slitting Machine structure






- Our Client








How to Fix Thermal Paper Roll Pressure Roller Issue?
Thermal paper rolls are widely used in many industries, such as retail, hospitality, and healthcare, due to their convenience and affordability.
However, one common issue that often occurs with thermal paper rolls is the tower shape issue when operate the slitting machine.This issue arises when the paper roll has a cone-like shape, which can make it difficult to use and cause problems with the printer.
The primary reason for the tower shape issue is the misalignment of the pressure roller in the slitting machine. The pressure roller is responsible for applying the necessary pressure to the thermal paper during the slitting process. If the pressure roller is not adjusted correctly, it can cause the paper to be cut unevenly, resulting in a tower shape issue.
To fix this issue, the slitting machine’s pressure roller must be adjusted properly. The following steps can be taken to adjust the pressure roller:
- Choose a spirit level tool: A spirit level tool is essential for adjusting the pressure roller. It will help you to determine if the pressure roller is level or not.
- Adjust the right side of the pressure roller: The left side of the pressure roller is fixed and cannot be adjusted. Therefore, you need to release the two screws on the right side of the pressure roller to adjust it.
- Rotate the wheel to adjust the pressure roller: To adjust the pressure roller, rotate the wheel until the water in the spirit level is at the middle position. This indicates that the pressure roller is level.
Once you have completed these steps, run the slitting machine again to check if the tower shape issue has been fixed. If not, repeat the above steps until the issue is resolved.
In conclusion, the tower shape issue with thermal paper rolls can be frustrating and problematic. However, it can be easily fixed by adjusting the pressure roller in the slitting machine.
By following the steps outlined above, you can ensure that your thermal paper rolls are cut evenly and do not have a tower shape issue.
The leading time of our paper slitting machine is 30 working days.
We are the manufacturer of paper slitting machines. You just need to send us the drawing you want to customize.
Usually, the voltage of our paper slitter rewinder is 3 Phase, 380V,50HZ.
We can also help make the voltage you needed.
Jota Machinery provides full service for each client. We not only provide the paper slitting machine but also source you the raw material.
Our slitting machines all have the essential export certification.
For more details please contact Jota Machinery.